Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DA001GZ01
Summary of Contents for Makita DA001GZ01
- Page 1 INSTRUCTION MANUAL Cordless Angle Drill DA001G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DA001G Gear speed High Drilling capacities Steel 13 mm (Diameter) Wood Auger bit: 50 mm Auger bit: 50 mm Self-feed bit: 65 mm Self-feed bit: 118 mm Hole saw: 105 mm Hole saw: 159 mm No load speed 0 - 1,500 min 0 - 400 min Overall length (with battery cartridge BL4040) -
Page 3: Ec Declaration Of Conformity
Do not abuse the cord. Never use the cord for WARNING: The vibration emission during carrying, pulling or unplugging the power tool. actual use of the power tool can differ from the Keep cord away from heat, oil, sharp edges declared value(s) depending on the ways in which or moving parts. - Page 4 Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
- Page 5 Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water or rain.
-
Page 6: Functional Description
Tips for maintaining maximum To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge. battery life To install the battery cartridge, align the tongue on the Charge the battery cartridge before completely dis- battery cartridge with the groove in the housing and slip charged. -
Page 7: Overload Protection
Tool / battery protection system Switch action The tool is equipped with a tool/battery protection sys- CAUTION: Before installing the battery car- tem. This system automatically cuts off power to the tridge into the tool, always check to see that the motor to extend tool and battery life. -
Page 8: Electronic Function
The mode indicator lights up in green when the tool is is released, have the tool serviced at a Makita service center. running in "high torque mode". If the tool is operated with excessive load, the mode Soft start feature indicator will blink in green. -
Page 9: Front Handle
To change the position, loosen the hex bolts (both ASSEMBLY sides) with a hex wrench and turn the front handle to the desired position. Then tighten the hex bolts securely. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. -
Page 10: Operation
The hook is also used for connecting the lanyard (tether Hook strap). Be sure to connect the lanyard (tether strap) to the double looped portion of the hook. CAUTION: Always remove the battery when hanging the tool with the hook. CAUTION: Never hook the tool at high loca- tion or on potentially unstable surface. -
Page 11: Drilling Operation
When drilling a large hole with a self-feed bit, etc., the CAUTION: Pressing excessively on the tool will side grip (auxiliary handle) should be used as a brace to not speed up the drilling. In fact, this excessive pressure maintain safe control of the tool. will only serve to damage the tip of your drill bit, decrease When drilling action is forward (clockwise), the tool the tool performance and shorten the service life of the tool. -
Page 12: Maintenance
16. In the event the tool is dropped, it must be tagged OPTIONAL and removed from service, and should be inspected by a Makita Factory or Authorized Service Center. ACCESSORIES MAINTENANCE CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.