Table of Contents
Advertisement
Basic adjustment
This adjustment allows you to set or to display the
following functions: Clock, Off / On Timer and Sleep
Timer.
Time
Time adjustments
●
●
Clock
This function allows you to display the clock information
(day / month / hour/ minute). The time and the date
can't be modified in this option.
●
●
Off Timer
Allows you to set a time when the TV automatically
enters in standby mode.
●
●
On Timer
Allows you to set the time when the TV must switch
on.
●
Sleep Timer
Allows you to setup the automatic Switch Off for:
10min., 20min., 30min., 60min., 90min., 120min.,
180min. and 240 min..
NOTE
•
Select "Off" to cancel the sleep timer.
• When the time has been set, countdown starts
automatically.
• The last minute is displayed second to second.
●
●
No Operation Off
Switches the TV off when no key is pressed for 3
hours.
●
●
No Signal Off
When this function is activated the TV automatically
enter standby mode if there is no signal input during
10 minutes.
In PC mode, when there is no signal input, the TV
goes into standby mode for 15 seconds.
●
●
Time Zone
Allows you to setup the time zone.
●
●
Summer time
Allows you to change automatically to summer time
(auto, off, on.)
●
●
USB REC Manual Temporization
Allows you to schedule the program recorder.
●
●
USB REC Programmed Recording List
Allows you to visualize all scheduled recordings.
●
●
USB REC Recorded List
Allows you to see the recorded program list.
Option settings
Options
Options menu
●
OSD Language
Allows you to select the screens language.
●
Audio Languages
Allows you to select the audio language.
●
Subtitle Language
Allows you to select the subtitles language.
●
Hearing Impaired
This function allows you to activate or deactivate the
subtitles for the hearing impaired. These subtitles have
priority.
NOTE
Subtitles will not be displayed when the service does not
contain subtitle information.
●
USB REC and TimeShift setup
Allows to select modes, disk, disk setup and speed
test for TimeShift function. Also allows you to see the
disk space reserved for USB REC.
See the operation on page 26.
●
Restore factory default
Recover the configuration that the TV had when it left
the factory.
●
Software Update (USB)
This option allows you to have the TV software version
always updated.
1 Add the binary file to USB memory root.
2 Insert the memory in the TV USB socket.
3 Press MENU on the remote control unit and
select OPTION.
4 Press ▼ until Software Update (USB) option
appears.
• Press OK. Are you sure? message is displayed.
• Select Yes with ◄/► and press OK. The software
update will start.
•The updated percentage appears. The TV will
restart automatically when the process arrives at
100%.
5 Return to OPTION menu to check that the version
has been updated successfully.
21
Advertisement
Table of Contents
