Table of Contents
Advertisement
Basic adjustment
Channel settings
Channel
Channel adjustments
Allows to reconfigure the channels after initial auto
installation has been completed.
Install channels
●
●
Auto Tuning
This function allows you to select the country and
automatically adjusts the channels for digital, cable or
analogue individually.
●
●
DTV Manual Tuning
Allows you to tune digital channels manually.
●
CADTV Manual Tuning (Only Lx220 series)
Allows you to add new cable services manually.
This setting appears after searching for cable broadcasts.
●
ATV Manual Tuning
Allows you to tune in analogue channels manually.
●
Programme Edit
Allows you to delete channels, to skip channels and to
set up a favourite channels list.
Select the channel you want to reorganize and press
the RED button to delete it, the BLUE button to skip it
(to ignore it), YELLOW button to move it, FAV to mark
it as favourite or GREEN button to rename it (only in
ATV mode.)
NOTE
If you press FAV when you are not in any adjustment menu,
the favourite channel list will appear.
●
●
Signal Information
Show the signal power and quality.
●
●
CI Information
Allows to see the CA card information (Conditional
Access Module): name, supplier and OSD.
Searching for cable broadcasts
(Only Lx220 series)
Allows you to add cable services.
1 Press ▼ key to select Auto Tuning and press OK.
20
2 With ▲/▼/◄/► keys select Tune type and CADTV.
Go to Start and press OK.
3 In Scan type choose between Full search or
Network.
Full: The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna for any network.
Network: Add new services within a specified
network identification.
If you choose Network, you can do an automatic
search (Auto) or may introduce the next parameters:
Frequency: start frequency searching.
Network ID: select a provider ( Network
identification number.)
Symbol(ks/s): symbol rate of signal cable.
:
NOTE
The
value
of
"Frequency",
"Symbol(ks/s)" should be set to the value specified by the
cable provider.
4 With ▲/▼ go to "OK" and press OK to start searching
cable broadcasts.
Time settings
"Network
and
ID"
Advertisement
Table of Contents
