Quick Steps - Whirlpool WDT970SAHZ User Instructions

1
Remove bulk food and load dishwasher.
Scrape off excess food into
garbage or food disposer.
2
Add detergent and rinse aid.

Quick Steps

Load dishes so that
water spray will reach
every surface.
3
Select a cycle and options (varies by model).
4
Start dishwasher.
To start and resume a cycle,
press the (Start/resume)
keypad and close the door
within 4 seconds. If the
door is not closed within
4 seconds, the Start keypad
LED will flash, an audible tone
will sound, and the cycle will
not start.
5
Unload dishwasher and
clean the filter.
See "Recommended Time
Interval to Clean Your Filter"
in the "Filtration System"
section for the recommended
cleaning schedule.
5