To Set Rating Region Table; To Change Password - HANNspree ST19DMSB User Manual

3.14 To Set Rating Region Table

RRT Setting defines the rating standard for a
particular geographic region and/or country.
1
Press / to select RRT Setting, and then
press to enter PRT setting.
2
Select each adjustable setting with
press / to select the sub-selection.
3
Press MENU to exit.
Note:
The picture here only shows an example of the content of RRT Setting. However, the
selections and sub-selections of RRT Setting may be different in your OSD menu
according to the local broadcasting system.
To reset RRT setting, move to Reset RRT, and press

3.15 To Change Password

1
Press / to select Change Password, and
then press to enter Change Password
setting.
2
Move to Enter Old Password, and then enter the
old password with number keys.
3
Enter your new password on Enter New
Password.
4
Enter your new password again on Confirm
Password. After you complete the last step, the
screen will return to the top page of Lock menu.
If so, the password has been changed
successfully.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
Canada
RRT Setting
/ , then
Reset RRT
Move
to reset.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
Canada
RRT Setting
Reset RRT
Move
Lock
Enter Old Password
Enter New Password
Confirm Password
Move
On
Off
Enter Return Exit
OK Return Menu
On
Off
Enter Return Exit
OK Return Menu
----
----
----
Enter Return Exit
OK Return Menu
39