Using The Tv; Turning The Tv On And Off; Switching Source Signals; Performing An Automatic Channel Search - HANNspree ST19DMSB User Manual

2.3

Using the TV

2.3.1

Turning the TV On and Off

1 Press on the control panel or remote control. The power LED indicator on
the TV changes from amber to blue, indicating that the TV is on.
2 Press again. The power LED changes from blue to amber, indicating that
the TV is off.
2.3.2

Switching Source Signals

Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search. Press OK to confirm.
2.3.3

Performing an Automatic Channel Search

Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or remote control, then select to enter the
Channel menu.
2 Select Air/Cable to set the signal source. (Air or Cable, default is Cable)
3 Select Auto Scan. Three options are available: Scan all channels, Digital
channel only, and Analog channel only.
• To search for digital channels only, select Digital channel only.
• To search for analog channels only, select Analog channel only.
• To search for both, select Scan all channels.
4 Press on the remote control to run the channel search.
2.3.4

Selecting Channels

• Press CH on the control panel or
channel number.
• Press CH on the control panel or
channel number.
• Enter the specific channel number by pressing the number buttons on the
remote control.
on the remote control to increase the
CH
CH
on the remote control to decrease the
27