HANNspree HANNSgolf User Manual page 54

Function Description:
H. Position
V. Position
Phase
Clock
DOS Mode
The option allows users to adjust the
horizontal position of the screen. The H
position ranges from -25~25. The default
value is 0.
The option allows users to adjust the vertical
position of the screen. The V position ranges
from -25~25. The default value is 0.
A measure of how well two waves are
aligned. "In phase" means the crests align
perfectly and add together. The Phase
ranges from 0-31. The default value is 15.
The computer is measured by electronic
circuits in an internal timing device. It stands
for the signal clock rate generated from the PC
graphic card. This item allows users to fine
tune the clock rate to match the PC source
perfectly for reducing the vertical band noise.
Select the mode from Text / Graphic.
Dedicated for DOS screen. Two Text/Graphic
moves available.
53