Vanity without top, 60" gray painted vanity base, 60" white painted vanity base, 60" mahogany vanity base, 60" black oak vanity base, 60" light gray finish vanity base, 60" carrara marble top with backsplash, 3500-60" engineered white top with backsplash, (13 pages)
Summary of Contents for Allen + Roth 2027VA-36-201
Page 1
• sophisticated • inspiring ALLEN + ROTH and logo design are trademarks or registered ITEM #2538095 trademarks of LF, LLC. All rights reserved. VANITY WITH TOP MODEL #2027VA-36-201 Español p. 11 ATTACH YOUR RECEIPT HERE Serial Number__________________ Purchase Date__________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m.
TABLE OF CONTENTS Package Contents...........................3 Hardware Contents..........................3 Safety Information..........................3 Preparation............................4 Assembly or Installation Instructions ....................4 Care and Maintenance........................9 Warranty............................9 Replacement Parts List........................10...
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Vanity Top (preassembled to vanity (A)) Backsplash Left Door (preassembled to Vanity (A)) Right Door (preassembled to Vanity (A)) Floor Plumbing Cutout Lid Shelf HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE) Touch Up Pen Qty. 1 SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry). Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone caulk, power drill with drill bit Helpful Tools (not included): Measuring tape, level...
Page 5
INSTALLATION INSTRUCTIONS Note: Clean area where the vanity (A) will be permanently located prior to beginning installation, ensuring the vanity (A) will not interfere with any water supply and drain lines once mounted. 2. With two people, carefully place vanity (A) against the wall in its final location.
Page 6
INSTALLATION INSTRUCTIONS 4. Apply silicone caulk (not included) to unpolished side and bottom of backsplash (C). Position backsplash (C) on top (B) and against wall. Clean any excess caulk before allowing to dry. 5. Insert the floor plumbing cutout lid (G) into the gap of bottom panel to add more storage space if installing the plumbing from the gap of back panel.
Page 7
INSTALLATION INSTRUCTIONS 6. From the front of the assembly, insert shelf pins at desired height, ensuring they are level. Place shelf (H) on top of shelf pins. 7. If you need to adjust the doors, do so in the following manner. To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
Page 8
INSTALLATION INSTRUCTIONS 8. To remove drawers preassembled in vanity (A), fully extend drawers. Locate plastic levers on metal glide tracks at left and right sides of drawer box. To disengage drawer box from glides, push on plastic levers. Then, gently lift drawer up to remove it from vanity (A).
CARE AND MAINTENANCE • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. • You can clean the vanity with a gentle, non-abrasive household cleaner. • Make sure to dry the wood immediately with a soft cloth or towel. •...
Touch-up pen B1044 Shelf Pin Pull (with screw) CF-96-004-BN Knob (with screw) CF-D25-005-BN Printed in Vietnam Hinge C-90-107 Leveler T-1007 ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved. Drawer Glide Set PUDTC-14X3-HANDLE...
Page 11
• sophisticated • inspiring ALLEN + ROTH y el diseño del logo son marcas comerciales ARTÍCULO #2538095 o marcas registradas de LF, LLC. Todos los derechos reservados. TOCADOR CON CUBIERTA MODELO #2027VA-36-201 ADJUNTE SU RECIBO AQUÍ Número de serie__________________ Fecha de compra__________________ ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento...
Page 12
ÍNDICE Contenido del paquete........................13 Aditamentos........................13 Información de seguridad......................13 Preparación..........................14 Instrucciones de ensamblaje o instalación...................14 Cuidado y mantenimiento......................19 Garantía............................19 Lista de piezas de repuesto......................20...
CONTENIDO DEL PAQUETE PIEZA DESCRIPCIÓN CANTIDAD Tocador Cubierta (preensamblada al tocador (A)) Protector contra salpicaduras Puerta izquierda (preensamblada al tocador (A)) Puerta derecha (preensamblada al tocador (A)) Tapa de corte para plomería del piso Estante ADITAMENTOS ( NO SE MUESTRAN EN TAMAÑO REAL Aplicador de retoque Cant.
PREPARACIÓN Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las piezas con la lista del contenido del paquete y la lista de aditamentos. No intente ensamblar el producto si falta alguna pieza o si estas están dañadas. Tiempo de instalación estimado: 45 minutos (24 horas para que seque la masilla de calafateo de silicona).
Page 15
INSTRUCCIONES DE INSTALACIÓN Nota: limpie el área donde se colocará el tocador (A) antes de comenzar con la instalación permanente y asegúrese de que el tocador (A) no interfiera con ningún suministro de agua ni desagües una vez montado. 2. Con la ayuda de dos personas, coloque cuidadosamente el tocador (A) contra la pared en su ubicación definitiva.
Page 16
INSTRUCCIONES DE INSTALACIÓN 4. Aplique masilla de calafateo de silicona (no se incluye) en el lado sin pulir y la parte inferior del protector contra salpicaduras (C). Posicione el protector contra salpicaduras (C) sobre la cubierta (B) y pegado a la pared. Limpie cualquier exceso de masilla de calafateo antes de permitir que se seque.
Page 17
INSTRUCCIONES DE INSTALACIÓN 6. Desde la parte delantera del ensamblaje, coloque los soportes para estante a la altura deseada y asegúrese de que queden nivelados. Coloque el estante (H) en la parte superior de los soportes para estante. 7. Si necesita ajustar las puertas, hágalo de la siguiente manera. Para ajustar las puertas hacia arriba o abajo, afloje los tornillos (a) en ambas bisagras, ajuste la puerta y vuelva a apretar los tornillos.
Page 18
INSTRUCCIONES DE INSTALACIÓN 8. Para retirar las gavetas preensambladas en el tocador (A), extienda las gavetas completamente. Ubique las palancas de plástico en los rieles de deslizamiento metálicos en los costados izquierdo y derecho de la caja de la gaveta. Para desconectar la caja de la gaveta de los deslizadores, presione las palancas de plástico.
CUIDADO Y MANTENIMIENTO • Limpie el tocador regularmente con un paño suave que no deje pelusas o con un producto de limpieza doméstico. • Puede limpiar el tocador con un limpiador doméstico suave no abrasivo. • Asegúrese de secar la madera inmediatamente con un paño o una toalla suave. •...
Tirador (con tornillo) CF-96-004-BN Perilla (con tornillo) CF-D25-005-BN Bisagra C-90-107 Impreso en Vietnam Nivelador T-1007 ALLEN + ROTH y el diseño del logo son marcas comerciales o marcas registradas de Juego de deslizadores de gaveta PUDTC-14X3-HANDLE LF, LLC. Todos los derechos reservados.
Need help?
Do you have a question about the 2027VA-36-201 and is the answer not in the manual?
Questions and answers