Installation - Magicfx CO2 Gun Manual

User documentation MAGICFX® CO2 Gun

10. INSTALLATION

For installing the CO2 Gun work in the following manner:
1.
2.
Page 11
CAUTION:
The machine can be damaged if you do not follow the procedures
carefully.
DANGER WARNING:
The MAGICFX® CO2 Gun may only be installed by adults and
authorised persons.
DANGER WARNING:
MAGIC FX is not liable for working with CO2 gas and CO2 bottles or for
the correct use thereof.
Exclusively use approved CO2 bottles (liquid carbon dioxide with dip
pipe) and consult your gas supplier about the installation, instructions,
guidelines and regulations for the safe use of the CO2 bottles.
Check to make sure that the handle is
locked by means of the safety catch.
If this is not the case, then move the
catch downwards to lock the handle.
Connect a CO2 high pressure hose to the
CO2 Gun.
Place the washer, which is attached to
the steel breakaway cable of the hose,
over the coupling of the CO2 Gun.