Key Takeover - Avital 4105L Owner's Manual

Table of Contents

* The factory setting is one press but this can also be programmed for

two or three presses maximum (see your authorized Directed installer

for the amount of presses programmed).

Record the number of presses to activate remote start here:____

If the engine fails to start, refer to "Disabling the Remote Start System"

and "Remote Start Diagnostics" sections of this guide.

Key Takeover

When you are ready to drive the vehicle:

Unlock the doors.

Enter the vehicle. Do not step on the foot brake.

Insert the key, turn it to the RUN (not START) position. Step on the

foot brake. The remote start is disabled and the parking lights turn

off.

Disengage the parking brake and begin driving.

Note

If your vehicle uses a Smart Key or PTS (Push-To-Start) system,

please refer to the vehicle specific instructions included with

the owner's guide of the interface module or consult your

authorized dealer.

Table of Contents