SC POWER SCZ60 Instruction Manual

SC POWER SCZ60 Instruction Manual

Electronic smart charger 6v / 12v 6a

Advertisement

Quick Links

INSTRUCTION MANUAL
ELECTRONIC SMART CHARGER 6V / 12V 6A
CHARGER SCZ60

GENERAL SAFETY

This manual contains operating guidelines and important safety procedures. Please read this user
manual carefully before using the charger and keep in a safe place for future reference.
Use charger in a safe well-ventilated environment that is clear of corrosive or explosive chemicals,
flammable liquids or gases. Keep charger and battery away from sources of ignition as a charging
battery produces explosive gases. It is recommended that safety goggles be worn.
Check charger for general condition and ensure that cables, input/output leads, plugs and crocodile
clips are not damaged in any way. Never use a charger that is damaged and never attempt to carry
out repairs to a damaged charger.
Charger should only be used by a responsible and competent adult.

WARNINGS

This device may be used by children at least 8 years of age and by persons with reduced physical,
sensory or mental capacities or without experience or knowledge if they are properly supervised or if
they have been given instructions on the safe use of the appliance and if the risk involved has been
apprehended.
Children are not allowed to play with this device
Cleaning and maintenance by user should not be carried out by children without supervision of an adult.
If the power cable is damaged, it must be replaced by the manufacturer, its after-sales service or
persons with similar qualifications in order to avoid a danger.
Do not attempt to start the vehicle with the charger connected to the battery.
Do not attempt to charge a non-rechargeable battery.
Do not use this charger to charge dry cell batteries.
Do not attempt to charge a frozen battery.
Only lead/acid (conventional, SLI, SMF, Gel and AGM) batteries (6-12V/3Ah to 6-12V/140Ah) should
be charged.
Charger should not be used as a continuous source of power.
Only use cables that are provided with this charger.
Do not use this battery charger if the mains lead or plug is damaged.
Do not use this battery charger if the output leads or crocodile clips are damaged.
Do not use this battery charger if it has been dropped or damaged in any way.
Turn off mains power supply before disconnecting charger from battery.
Avoid contact with battery acid and wash immediately with water if acid does come into contact with
skin or eyes.
Wear safety goggles and protective clothing to offer protection from acid and electrolyte.
Do not attempt to clean charger with cleaning solvents, use only a clean cloth or tissue.
Do not smoke near battery and ensure adequate ventilation.
Do not cover charger during operation and disconnect from mains when not in use. Disconnect charger
if battery heats up excessively or if leaks from the battery appear. When charging battery never allow
battery terminals to be connected by any means.
Remove all metal objects (rings, bracelets etc.) when handling battery charger to avoid short circuits
and resultant burns.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCZ60 and is the answer not in the manual?

Questions and answers

Summary of Contents for SC POWER SCZ60

  • Page 1 INSTRUCTION MANUAL ELECTRONIC SMART CHARGER 6V / 12V 6A CHARGER SCZ60 GENERAL SAFETY This manual contains operating guidelines and important safety procedures. Please read this user manual carefully before using the charger and keep in a safe place for future reference.
  • Page 2 DISPOSAL In the event that this product must be disposed of, an authorized place for the recycling of electrical and electronic appliances must be sought. Contact your local authority for information concerning local Household Recycling Centres with applicable facilities. This product must not be disposed of with general domestic waste. BATTERY CHARGING INSTRUCTIONS Please read your vehicle manufacturer’s instructions for further information and advice regarding the disconnection of the battery for charging purposes.
  • Page 3 Stop charging at any time by pressing Mode button to get back to standby model. When disconnecting charger, disconnect AC cord first, remove clip from vehicle chassis, and then remove clip from battery terminal. Do not charge the battery while the engine is operating. 4.
  • Page 4 6. SPECIFICATIONS Model No : SCZ60 Rated Input Voltage : 220-240 V, 50 Hz Rated Input Current : 0.65 A Charging Current : 6V/2A – 12V/2A or 6A Start Voltage : Charger Type : 6 steps charging cycle Battery Type :...

Table of Contents