Components And Operation; General Information - Schiller FRED PA-1 TRAINER User Manual

®
FRED PA-1 TRAINER
Operating modes
Languages
Standard package
User Guide
2 Components and Opera-
tion
2.1

General Information

The FRED PA-1 TRAINER is a simple and cost-effective simulator of the
FRED PA-1 that is designed to be used exclusively for training.
The FRED PA-1 TRAINER doesn't deliver any energy, it simply plays through the re-
suscitation process with different scenarios. It is powered by 4 standard 1.5 V AA/LR6
batteries.
The FRED PA-1 TRAINER equipped with Bluetooth, identified by the symbol
the device label, can be controlled and configured via your smart-phone/tablet PC with
the "Defi training application" which can be downloaded from:
The FRED PA-1 TRAINER provides simulation that aim to help to familiarise with the
FRED PA-1® and shows that the users have the knowledge required to use it if nec-
essary.
The operating mode can be selected by configuration. One device is enough to train
both the fully automatic and semi-automatic mode.
• One scenario can be predefined.
• Scenario can be changed live by using the Defi training application.
All languages available on the FRED PA-1 are also available on the Trainer.
Language selection as well as scenario selection is done by configuration (at produc-
tion site or distributor).
The FRED PA-1 TRAINER standard package includes:
• 1 FRED PA-1 TRAINER
• 1 SD card with the scenario shock recommended / shock recommended / shock
not recommended
• 1 set of training electrodes
• 1 training electrodes cable
• 4x 1.5V AA/LR6 batteries

Components and Operation

General Information
2
2.1
on
Page 9