Operation; General Application Procedure - Schiller MTM-1400 MED Original Instruction

8 Operation

8.1 General application procedure

Description
Disinfect the device (see "cleaning").
Disconnect the device and all accessories from mains
power supply before cleaning or disinfection.
Make sure...
...the PE-cable is connected to electrical installation
and device,
...the device is directly plugged into the dedicated wall
socket,
...the device protection switch on the front of the device
is switched on (light on),
...all emergency offs are released.
Switch the running machine on with the on/off switch
on the UserTerminal (light goes on).
Make sure the space under the treadmill is free from
persons, body parts or objects, especially when
switching on (treadmill will lower during initialization)
and when changing the elevation.
Normal condition: When starting, all displays show
"0"-values.
Select an operation mode.
For a detailed description, see following chapters.
Perform application.
Switch the running machine off with the on/off switch
on the UserTerminal (light goes off)
Disinfect the device (see "cleaning").
Disconnect the device and all accessories from mains
power supply before cleaning or disinfection.
Illustration
-
cos105000-2016-00 en
page 26