Grizzly T33150 Owner's Manual page 7

Remote Control
J
O
N
Figure 2. Remote control.
J. AUTO on/off Button: Turns automatic fan
speed setting ON or OFF.
K. on/off Button: Powers machine ON or OFF.
L. Fan Button: Cycles through fan speed set-
tings as indicated on digital readout.
— T33150: Speed settings 1 (400 CFM),
2 (500 CFM), and 3 (620 CFM).
— T33151: Speed settings 1 (800 CFM),
2 (1000 CFM), 3 (1200 CFM), 4 (1300
CFM), and 5 (1400 CFM).
M. Filter 2 Reset Button (FR2): Resets Filter
2 Indicator Light on control panel after acti-
vated carbon filter has been replaced. Press
FR2 button on remote control and hold for 5
seconds. Machine will beep and light on con-
trol panel will turn blue.
Model T33150/T33151 (Mfd. Since 03/22)
N. Filter 1 Reset Button (FR1): Resets FIlter 1
K
L
O. Time Button: Cycles through time settings
M
Exhaust Port & Filter Access Door
P. Exhaust Port: Location where filtered air
Q. Filter Access Door: Unscrew knobs to
Indicator Light on control panel after HEPA
filter has been replaced. Press FR1 button
on remote control and hold down for 5 sec-
onds. Machine will beep and light on control
panel will turn blue.
as indicated on digital readout. Time settings
are 2 hours (2), 4 hours (4), 6 hours (6), 8
hours (8), and indefinite (blank). If left on
indefinite, machine digital readout will return
to indicating fan speed.
P
Figure 3. Exhaust port on T33150.
exits machine.
access secondary activated carbon filter.
Q
-5-