WARRANTY INFORMATION The following designations are not owned by or associated with Wampler Pedals, Inc. but are instead owned by their respective owners: Way Huge Aqua Puss, Electro-Harmonix Memory Man, Boss DM-2, Maestro Echoplex, Binson Echorec, TC Electronics 2290 Dynamic Digital Delay.
Alt: sets modulation feedback Alt: indicates current subdivision for JET and MOD programs • Pressing tap tempo switch will Alt: (TAPE) indicates TAPE head combination exit Preset save mode Alt: (ETH) indicates Ethereal mode WAMPLER METAVERSE Page 3...
This Program takes a classic analog sounding delay circuit, one DOC - WAMPLER ‘THE DOCTOR’ that is at home in any style of music, and gives it that Wampler touch. Based on the kind of warm, smooth, analog delay that The next regeneration of the Doctor is surely a welcome one would have been found in the mid 1980’s, somewhat similar to...
Echoplex ® style delay units with use the Wampler pedals are famous for. This Program now also Brian Wampler’s take. These delays were famous for their self benefits from an extended range to 2000ms. There are also more oscillation capabilities and this Program is no different. The...
True Bypass or Buffered Bypass (Trails) mode - True Bypass mode to set the head combination and Ethereal modes respectively. on the left), Buffered Bypass (Trails) mode to the right. TONE KNOB Set the frequency profile of the delay effect, with most ‘bass’ WAMPLER METAVERSE Page 6...
ROUTING & CONNECTIONS EXPRESSION PEDAL The METAVERSE can be run in either Mono or Stereo using 2-4 An external expression pedal can be assigned to control ANY of guitar cables. The optimum connection for this pedal will be in the Rotary Controls on the METAVERSE. This information is also the effects loop of a guitar amplifier.
PRESETS The Tap Tempo footswitch has two functions - to set the tempo The METAVERSE has 128 Preset locations to allow the saving of by tapping the switch to a rhythm and also as a Preset selector. favorite settings (Presets), 8 of which can be saved and quickly recalled by the front panel Preset switch or via the Tap Tempo Switch in Preset increment mode.
LOADING A PRESET (FRONT PANEL) To load a Preset using the front panel Preset Switch: The METAVERSE offers complete control over every Program 1. Press the front panel switch to load the next Preset via either MIDI CC Messages or PC Commands. It can accept a 2.
0-10 14 = Triplet Whole 4 - DOC - Wampler ‘The Doctor’ 5 - FTE - Wampler ‘Faux Tape Echo’ A Time High message followed by a Time Low message 6 - ETH - Wampler ‘Ethereal’ delay will set the delay time to a specific ms value. It is possi-...
Patch Change (PC) messages can be used to recall Presets When changing Presets with the Preset Switch or Tap Tempo (Patches) stored on the METAVERSE. Switch configured to increment Presets, the device will: 1. Send a PC message matching the loaded Preset number from...
To get started really quickly with MIDI, the simplest route is to 1. Power off the device, and connect a 3.5mm TRS cable to the create Presets on the METAVERSE and send PC messages from a MIDI In and Out jacks, connecting them together.
INCIDENTAL OR CONSEQUENTIAL DAMAGE. In no event is WAMPLER liable for any incidental or consequential damages arising out of the use or inability to use of any WAMPLER product, even if WAMPLER PEDALS LIMITED WARRANTY. WAMPLER or a WAMPLER dealer has been advised of the possibility of such damages, or any other claim by any other party.
Need help?
Do you have a question about the METAVERSE and is the answer not in the manual?
Questions and answers