Terminals; Connect Devices; Watch Tv - Philips 7 Series User Manual

Terminals

a
b
c
*
d
e
a 75 ohm Cable/Antenna connection
Signal input from an antenna or Cable/Satellite set-top
boxes.
b USB terminal
Data input from USB memory stick only.
c HDMI input jack(s)
Digital audio and video input from high definition digital
devices such as DVD/Blu-ray Disc™ players, Soundbar/
cable/satellite set-top boxes, PC's, etc.
HDMI-DVI/Analog audio (L/R) jacks signal
–
Composite video/Analog audio (L/R) jacks signal
–
PC connection/Analog audio (L/R) jacks signal with
–
stereo mini 3.5 mm plug audio cable on PC
* For HDMI 2 only: In addition to normal HDMI
functionality, it outputs TV audio to an HDMI-ARC
compliant device, such as a soundbar and home theater
system.
d Digital audio output (Optical) jack
Digital audio (SPDIF) output to home theaters and other
digital audio systems.
e Ethernet port
For internet connection using an Ethernet cable with an
RJ-45 connector.
f Composite video (VIDEO) input jack
Connect composite analog video signal.
g Headphone audio output jack
Headphone 3.5 mm stereo jack for personal listening.
h Analog audio (L/R) input jacks
Connect analog audio signals from;
HDMI-DVI/Analog audio (L/R) jacks signal
–
Composite video/Analog audio (L/R) jacks signal
–
PC connection/Analog audio (L/R) jacks signal with
–
stereo mini 3.5 mm plug audio cable on PC
Note(s)
This TV has a USB port which is designed for connecting peripheral
●
devices, such as a keyboard or mouse. While you may find that a
particular keyboard or mouse works to some extent, we cannot
guarantee full functionality. You will not damage the TV in any way by
trying various keyboards or mice, but the performance of that device
may be limited.

Connect devices

Watch TV

Please choose your type.
Be sure your antenna or another device is connected properly
before plugging in the AC power cord.
A. Directly TV to Antenna through RF cable
f
g
h
B. Satellite set-top box through RF cable
C. Satellite set-top box through RF & HDMI
* You must use UltraHD 4K HDMI cable for 4K video.
Note(s)
If you have any question about the DTV's antenna, visit
●
www.antennaweb.org for further information.
Depending on your antenna system, you may need different types of
●
combiners (mixers) or separators (splitters) for HDTV signal. The
minimum RF bandpass on these devices is 2,000 MHz or 2 GHz.
For your safety and to avoid damage to this unit, please unplug the RF
●
coaxial cable from the antenna input jack before moving the unit.
If you did use an antenna to receive analog TV, it should also work for
●
DTV reception. Outdoor or attic antennas will be more effective than a
set-top box or inside antenna.
To turn on your reception source easily between antenna and cable,
●
install an antenna selector.
If you are not receiving a signal from your cable service, contact the cable
●
provider.
IN
Antenna
RF cable
IN
Antenna
RF cable
IN
HDMI cable
OUT
13 .
English
Cable
OUT
RF cable
IN
OUT
Set-top box
RF cable
IN
Set-top box
Back to Contents