Table of Contents
Advertisement
9.24. Remove the C6-Board
1. Remove the Hanger metal R. (See section 9.16.)
2. Remove the Cabinet mount metal top. (See section 9.17.)
3. Disconnect the flexible cable holder fastening screws
(×10
).
4. Disconnect the flexible cables (CA9, CA10, CA11, CA12,
CA13, CA14 and CA15).
5. Disconnect the flexible cables (C61 and C66).
6. Remove the connector (C65).
7. Remove the screws (×5
9.25. Remove the Plasma panel sec-
tion from the Cabinet assy
1. Remove the Cabinet mount metals fastening screws (×10
).
2. Remove the plasma panel fastening screws (×3
) and remove the cabinet assy.
) and remove the C6-Board.
3. For leaving the cabinet assy from the plasma panel, pull
the bottom of the cabinet assy forward, lift, and remove.
9.26. Remove the Contact metals
1. Remove the Cabinet assy. (See section 9.25.)
2. Remove the screws (×4
3. Remove the Contact metal top.
4. Remove the screws (×6
, ×8
5. Remove the Contact metal bottom.
6. Remove the screws (×4
7. Remove the Contact metal side (L, R).
33
).
).
).
Advertisement
Table of Contents
