9.16. Remove the Hanger metals and
the One leg bracket
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the One leg bracket fastening screws (×4
and the One leg bracket.
3. Remove the Hanger metals (L, R) fastening screws (×2
each) and remove the Hanger metals (L, R).
9.17. Remove the Cabinet mount
metals
1. Remove the One leg bracket. (See section 9.16.)
2. Remove the Cabinet mount metals fastening screws (×10
, ×20
) and remove the Cabinet mount metal top
and the Cabinet mount metal bottom.
)
9.18. Remove the D-Board
1. Remove the AC inlet. (See section 9.1.)
2. Remove the Woofer. (See section 9.9.)
3. Disconnect the flexible cables (D5, D20, D31, D32, D33
and D34).
4. Disconnect the connectors (D3 and D25).
5. Remove the screws (×4
31
) and remove the D-Board.