Operation - Klarstein AIR BLOOM Manual

EN
30

OPERATION

Before first use
1. Remove all packaging materials, fasten the partition wall block, place the
machine on a stable horizontal surface.
2. Clean the pot, frying basket slices, cake plate and other accessories with hot
water, liquid detergent and non-abrasive sponge.
3. Fill the tank with water (recommend use distilled or purified water).
4. Wipe the inside and outside of the appliance with a cloth.
5. First use, please don't put any food in the pot, fill the tank with purified water.
Use the preset function - "fish" to run one cycle with steam function at the
same time, which time may smell a slight smell and smoke, don't worry, it's a
normal phenomenon.
Product operating instructions
When the power is turned on, there will have a "Bi" sound, the digital screen and
all indicator lights flicker and turn off, only the  button indicator light flashes
slowly, indicating that the appliance is power on state (the power on state is the
standby mode).
Put the ingredients in the clean pot, and put the pot into the housing. Fill the
tank with water. Plug in the power plug. Press  button, the digital screen lights
up. The user can choose proper function buttons, cooking time and temperature
according to the food materials and preferences, just press
automatically.
Note: This machine uses the principle of light wave tube heating to cook, and the
lighting in the appliance can not be controlled by human.
Menu function selection
Press  button, all lights on the control panel light up, means enter the
1.
function selection interface.
2. Select the function menu, the corresponding function menu indicator will light
⏯
up, press button to start work.
⏯
button to cooking