Advertisement
Operating the product
To begin
1. Make sure the power/intensity switch is off and install 4 AAA batteries into the
device.
2. Connect 1 electrode wire in the left hole and another electrode wire in the right
hole at the top of the pulse massager.
3. Attach the electrode pads to the treatment area , such as shoulder.
4. Turn the power/intensity switch to 1. The screen should show P. This means the
device is ready to begin treatment.
5. Pres s one of the function keys to choose treatment.
6. Adjust the power/intensity to a comfortable level and begin treatment.
Note: Start low, and then gradually adjust to a level of comfortable treatment on a scale
level from to 1 to 10.
Best practices:
1. Dura tion is 10-15 minutes for treatment area.
2. Frequency is 1- 2 treatment per day.
3. Intensity is based upon your level of comfort.
4. Speed is based on your level of comfort.
5. Begin the first session with a low intensity and a short duration while learning
how to o perate.
6. If you feel pain, dizziness, discomfort or nausea, call your physician.
Advertisement
