Samsung Chef NV51M9770 Series Installation Manual page 8

Preparation
Flush cabinet dimensions
01 Dimensions provide minimum reveals. (except electrical supply location 'E')
02 Allow a minimum of 22" (559 mm) for clearance to adjacent corners, drawers,
walls, etc. when door is open.
03 Flush installation requires recessed strips (not included) attached to the side of
the cabinet opening for mounting the oven.
1 / " (33 mm)
3
8
Top view
51 /
7
(1316 mm)
12"
(305 mm)
Side view
8 English
Install_NW9000K_CHEF_WALL-DG68-01005A-00_EN+MES+CFR.indb 8
24 / "
7
8
(630 mm)
/ " (20 mm) Cleat width
7
8
Max. 9 1 / " (241 mm)
2
30 1 / "
4
(767 mm)
" Min. 47"
8
(1194 mm)
Front view
If codes permit and a separate ground wire is used, it is recommended that a
qualified electrical installer determine that the ground path and the wire gauge are
in accordance with local codes.
Check with a qualified electrical installer if you are not sure the oven is properly
grounded.
This oven must be connected to a grounded-metal permanent wiring system.
Be sure that the electrical connection and wire size are adequate and in
conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA
Standards C22.
1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all
local codes and ordinances.
A copy of the above code standards can be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
7/31/2017 4:43:19 PM