Self-Diagnosis; Temp Sensor & Heater Check - Samsung Chef NV51M9770 Series Installation Manual

Barrier
Install_NW9000K_CHEF_WALL-DG68-01005A-00_EN+MES+CFR.indb 15
WARNING
When inserting the oven, use caution not to
deform or damage the barrier underneath.

Self-diagnosis

Temp sensor & Heater check
1. After connecting the power, check if the display works properly.
2. Remove all accessories (Gliding Rack, Flat-Rack, Smart Divider...etc.) from
inside of the oven cavity.
You cannot proceed with self-diagnosis if the oven cavity is hot or the door is
3.
open.
• In this case, "Hot or door" message appears on the display.
4. To start self-diagnosis, press both Hidden Keys simultaneously for 5 seconds
and select install test button.
• Refer to the table below for the hidden keys for each model.
• Self-diagnosis takes approximately 4-5 minutes.
Model
Control panel
Hidden Key
Model
Control panel
Hidden Key FLEX UPPER + FLEX LOWER
NV51M9770D*
UPPER + LOWER
NV51M9770S*
English 15
7/31/2017 4:43:21 PM