Setting The Microwave Power; Setting The Duration; Quick Preheat; Key Lock - Whirlpool AMW509/IX User And Maintenance Manual

Table of Contents

Advertisement

EN 12

7.3 SETTING THE MICROWAVE POWER

To set the power level for all cooking cycles, where
possible (Microwave
Turbo Grill Combi
, Forced Air Combi
The default value is displayed and "W" flashes.
Turn
to set the desired power.
Press
to confirm and go ahead with the wizard
mode or press
to quick start.
NOTE: by pressing
°C / W
possible to adjust the microwave power.

8 SETTING THE DURATION

To set the duration of a cooking cycle, except for the
6
Sense
and Quick Preheat
th
The default value is displayed and
Turn
to set the duration.
Press
or
to confirm and start cooking cycle.
NOTE: by turning
possible to adjust the duration.
Each time you press
in 30-second increments.
, Grill Combi
,
).
during a cooking cycle, it is
functions.
flashes.
during a cooking cycle, it is
, this increases the duration

9 QUICK PREHEAT

To preheat the microwave oven cavity quickly.
See the full description on page 15.
Select the icon in the right-hand display.
Press
to confirm.
Turn
to set the target temperature.
Press
or
to start quick preheat.
When the appliance reaches the target
temperature, a buzzer sounds.
Do not put food into the cavity before the end of the
quick preheat phase.

10 KEY LOCK

To lock the control panel buttons.
Hold
for at least 5 seconds.
To deactivate.
Hold
for at least 5 seconds.
NOTE: for safety reasons, the appliance can always
be switched OFF during a cooking cycle by pressing
.
USING THE APPLIANCE

Advertisement

Table of Contents
loading

Table of Contents