Table of Contents
Advertisement
Usage
Front touch control panel
Warning To prevent damages to the touch control panel, do not touch it with wet or oily hands
Empty CO bottle LED
1
₂
Power LED (to be used also during water tank draining)
2
Ambient water LED
3
Cold sparkling water LED
4
Cold still water LED
5
Ice shards LED
6
Light LED
7
Filter LED
8
First Start-up
Warning Dispense 3 litres of cold still water and 1 litre of cold sparkling water to rinse out well
the water coils
Turn on the appliance using the power switch placed on the right side of the appliance.
The power LED will start flashing.
When the power LED stops flashing, the touch control panel becomes active.
When using the Refreshment Centre for the first time you need to wait 5 hours before the appliance
provides full operating results.
During this period of time the appliance is working but with limited performance.
The above procedure needs to be followed also after extended inactive period of time.
Regulate water inlet pressure
Warning The pressure reducer must be opened only when the installation process is complete
and the appliance is switched on
Usage
15
Advertisement
Table of Contents
