Check For Leaks - Kohler K-45205 Installation Manual

Handle
Flow to
Showerhead
10. Using Your Shower Column
NOTE: If water does not flow through the handshower or shower
hose, the shower hose was incorrectly installed. To correct, reinstall
the shower hose ensuring the end of the hose containing the check
valve is attached to the elbow or shower column.
NOTE: This product is not designed to stop water flow. Positioning
the handle to the left will result in partial flow from both the
showerhead and handshower.
To use the showerhead, turn the handle to the upward position.
To use the handshower, turn the handle to the downward
position.

11. Check for Leaks

Turn on the water.
Turn the handle upward and check connections for leaks.
Turn the handle downward and check connections for leaks.
1176876-2-C
Handle
Handle
Flow to
Handshower
18
Partial Flow
to Both
Kohler Co.