Table of Contents
Advertisement
Frequently Asked Questions
Water intake fault
Problem
The / indicator
light flashes on and off.
and 173 appear alter-
nately on the time dis-
play.
The dishwasher stops
during a program.
The / indicator
light is flashing.
The fault number or
appears in the dis-
play.
The dishwasher stops
during a program.
Fault number 8 ap-
pears in the time dis-
play.
62
Possible cause and solution
The water supply is turned off.
Open the water-supply faucet all the way.
Before remedying the fault:
Turn the dishwasher off with the button.
Water-intake fault.
Open the water-supply faucet all the way and start
the program again.
Clean the water-intake filter (see "Cleaning the wa-
ter-intake filter" under "Cleaning and care").
The water-connection pressure is lower than 7.25
psi (50 kPa).
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see "Water drainage" under "Installa-
tion").
A technical fault has occurred.
Turn off the dishwasher.
Turn off the water-supply faucet.
Contact Miele Customer Service.
Advertisement
Table of Contents
