Table of Contents
Advertisement
3. MENU settings
DISP SETUP <continued>
Menu item
OTHER DISPLAY
POWER LCD
LCD BACKLIGHT
(AG-UX180 only)
LCD SET
EVF SETTING
EYE SENSOR
(AG-UX180 only)
SELF SHOOT
EVF COLOR
EVF/LCD DETAIL
EVF/LCD PEAK
LEVEL
EVF/LCD PEAK
FREQ.
Description
Show the information other
than the following.
USER buttons, Guide lines,
Safety zone, Center marker,
Date&time, Audio level meter,
Lens status, remaining time
(SD card and battery)
Boost up brightness of LCD
panel for outdoor use.
Set brightness of the built-in
LCD monitor.
Adjust image characteristics of
the built-in LCD monitor.
Adjust image characteristics of
the viewfinder.
Set sensitivity of the proximity
sensor on the viewfinder.
Set display mode of the
built-in LCD monitor. Choose
"MIRROR" when performing
self-portrait recording. (Image
can be inverted horizontally.)
Turn OFF color image display
on the Viewfinder.
Turn ON edge enhancement
feature on the viewfinder and
the built-in LCD monitor for
easy focusing.
Set enhancement level in the
EVF/LCD DETAIL setting.
Set enhancement frequency in
the EVF/LCD DETAIL setting.
(Factory default setting underlined)
ON / OFF
-1 / 0 / +1
HIGH / LOW
COLOR, BRIGHTNESS, CONTRAST
COLOR, BRIGHTNESS, CONTRAST
-4 - -2 - +4
MIRROR / NORMAL
ON / OFF
ON / OFF
-3 – 0 - +3
HIGH / LOW
31
Value
Advertisement
Table of Contents
