Overview of Status Notification Sample Program
This program displays the status of the connected printer on the screen.
For the configuration such as Hardware Configuration
configuration is used as with the Server Direct Print.
File Configuration
File Name
Test_status.php
resultPrint.log
demo
indexStatus.html
TM Intelligent Printer Settings
The registration screen will vary according to the model of TM Intelligent printer.
•
•
TM-i Series Settings
Configure the Status Notification settings using EPSON TMNet WebConfig.
Use the following procedure for registration.
1
Connect the printer to the network and turn the power ON.
2
Start the Web browser on the setup computer and enter as follows:
For TM-i Firmware Ver.4.0 or later
http://[IP address of the TM-i series]/webconfig/
For TM-i Firmware Ver.3.x or earlier
http://[IP address of the TM-i series]/PrinterConfigurationPage/
3
EPSON TMNet WebConfig starts.
For TM-i Firmware Ver.4.0 or later, select [Web Service Settings] - [Status Notification].
For TM-i Firmware Ver.3.x or earlier, select [Configuration] - [Status Notification].
58
Obtains and displays the result in response to a request from the printer.
The printing result is retained in this file. The file is created after printing.
Displays the printer status.
"TM-i Series Settings" (p.58)
"TM-DT Series Settings" (p.60)
(p.
20) and Environment Settings
Description
(p.
23), the same