Epson TM-DT Series User Manual page 42

<Parameter> Tag
Set the <Parameter> tag as shown below.
<PrintRequestInfo Version="1.00">
<Parameter>
<devid>(Device ID used for slip
<timeout>(Timeout time (in
</Parameter>
Example
<Parameter>
<devid>local_printer</devid>
<timeout>10000</timeout>
</Parameter>
<PrintRequestInfo Version="2.00">/<PrintRequestInfo Version="3.00">
You can specify the print job ID with the TM-i series TM-i firmware Ver. 4.1 and later, TM-DT series
TM-DT software Ver. 3.0 and later, and TM-T88VI.
If specifying a print job ID, specify the print job ID in the <printjobid> tag of the <Parameter> tag.
The print job ID must have 1 to 30 characters and allowable characters are alphanumerical characters,
underscore, hyphen and period.
Specify the print job ID
<PrintData> Tag
Describe print data. Even if the <PrintRequestInfo> version is different, the print data can be shared.
For details, see ePOS-Print XML User's Manual.
<DisplayData> Tag
The <DisplayData> tag is available with <PrintRequestInfo Version="3.00">.
For details, see ePOS-Print XML User's Manual.
42
printing)</devid>
milliseconds))</timeout>
<Parameter>
<devid>local_printer</devid>
<timeout>10000</timeout>
<printjobid>ABC123</printjobid>
</Parameter>