LG FWMT85WE Owner's Manual page 37

global_main.book.book Page 37 Tuesday, September 15, 2020 1:21 PM
2
Select a washing programme.
3
Press the Pre Wash button as
necessary.
4
Press the Start/Pause button.
Delay End
You can set this function so that the
appliance starts automatically and
finishes after a specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button as
necessary.
4
Press the Start/Pause button.
NOTE
• Except for LED of the Delay End
button, all LEDs on the control panel
will be turned off within 20 minutes.
This feature may vary depending on
the model purchased.
• The delay time is the time to the end of
the programme, not the start. The
actual running time may vary due to
water temperature, clothes and other
factors.
• To cancel the function, the Power
button should be pressed.
• Avoid using liquid detergent for this
function.
Settings
Child Lock
Use this option to disable the controls.
This function can prevent children from
changing cycles or operating the
appliance.
NOTE
• Once this function is set, all buttons
are locked except the Power button.
• When the controls are locked,
the remaining time are alternatively
shown on the display during the wash
while this function is engaged.
• Turning off the power will not reset
this function. You must deactivate this
function before you can access any
other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Spin and Temp.
buttons at the same time for 3
seconds to activate this function.
• A beeper will sound, and
appear on the display.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Spin and Temp.
buttons at the same time for 3
seconds to deactivate this function.
OPERATION
37
and
[L
will
CL