Speedometer And Odometer; Trip Odometer; Tachometer; Safety Belt Reminders - Chevrolet 2010 Tahoe Owner's Manual

Chevrolet 2010 tahoe automobile owner's manual
Hide thumbs Also See for 2010 Tahoe:
Table of Contents

Advertisement

The speedometer shows the vehicle's speed in both
kilometers per hour (km/h) and miles per hour (mph).
The odometer shows how far the vehicle has been
driven, in either kilometers (used in Canada) or miles
(used in the United States).
The trip odometer can show how far the vehicle has
been driven since the trip odometer was last set to zero.
Press the reset button, located on the instrument panel
cluster next to the trip odometer display, to toggle
between the trip odometer and the regular odometer.
Holding the reset button for approximately one second
while the trip odometer is displayed resets it.
To display the odometer reading with the ignition off,
press the reset button.
The tachometer displays the engine speed in
revolutions per minute (rpm).
4-32
When the engine is started, a chime sounds for
several seconds to remind a driver to fasten the safety
belt, unless the driver safety belt is already buckled.
This chime and light sequence are repeated if the driver
remains unbuckled and the vehicle is in motion. If the
driver safety belt is already buckled, neither the chime
nor the light comes on.
For vehicles equipped with the passenger safety belt
reminder light, several seconds after the engine is
started, a chime sounds for several seconds to remind
the front passenger to buckle their safety belt. The
passenger safety belt light, located on the overhead
The safety belt
light flashes for
several seconds, then
comes on solid for
several more.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 suburban 15002010 suburban 25002010 suburban

Table of Contents