Epson ColorWorks C7500 Setup Manual page 3

English
Cautions on Power Supply
!
WARNING:
❏
Use only AC 100 V for power supply. Using other type of power supply may cause electric shock or
fire.
❏
Do not allow dust or foreign materials to adhere to the power plug. Accumulated dust or foreign
material may cause electric shock or fire.
❏
Insert the power plug securely into the socket. Failure to insert the plug securely may cause electric
shock or fire.
❏
Use only the power cable supplied with this product. In addition, use the supplied power cable only
for this product. Other use may cause electric shock or fire.
❏
Do not use a damaged power cable. Doing so may cause electric shock or fire.
Contact a Seiko Epson service center for advice if the power cable is damaged. Observe the
following points so as not to damage the power cable:
• Do not modify the power cable.
• Do not place heavy objects on the power cable.
• Do not forcibly bend, twist or pull the power cable.
• Do not locate the power plug near a heating device.
❏
Do not hold the power plug with a wet hand. Doing so may cause electric shock.
❏
Do not connect too many power cables to one outlet. Doing so may cause fire.
❏
Disconnect the power plug from the outlet on a periodical basis, and clean the areas around and
between the blades. Leaving the power plug connected to the outlet for a long period of time may
cause dust to accumulate on the blade root, resulting in a short-circuit or fire.
❏
Hold the plug and do not pull the cable when disconnecting the power plug from the outlet. Pulling
the cable may damage the cable or deform the plug, causing electric shock or fire.
!
CAUTION:
❏
To ensure safety, unplug this product before leaving it unused for an extended period.
Cautions on Handling
!
WARNING:
❏
Do not use this product in a location with volatile substances such as alcohol or paint thinner, or
near fire. Doing so may cause electric shock or fire.
❏
Shut down the product immediately if it produces smoke, a strange odor, or unusual noise.
Continued use may cause electric shock or fire. Immediately unplug the product when a fault or
other problem occurs, and contact your dealer or a Seiko Epson service center for advice.
❏
Shut down the product immediately if water or other liquid spills into this product. Continued use
may cause electric shock or fire. Immediately unplug the product and contact your dealer or a
Seiko Epson service center for advice.
❏
Never disassemble or repair this product. Tampering with this product may result in injury or fire.
❏
Do not use this product in an environment where inflammable gas or explosive gas may exist. Do
not use aerosol sprayers containing flammable gas inside or around this product. Doing so may
cause fire.
3