Advertisement
Using Your Kambrook Desk Fan
Operating your Kambrook
Desk Fan
Plug the cord into a 230V or 240V
power point and switch on.
WARNING: Never insert
fingers, pencils or any
other objects through
the guards whenever the
power plug is connected,
in particular while the fan
is switched on.
The fan has 3 speed settings. To adjust
the flow of air, turn the fan speed
selection dial located at the back of
the fan to the preferred speed setting
– 'LO', 'MED' or 'HI'.
To turn Off, turn the fan speed
selection dial to the 'OFF' position.
Setting the Oscillation
The oscillation works in all air flow
settings.
Press down the 'SWING' button to
activate. The fan will begin to oscillate
from side to side.
Lift the 'SWING' button to stop the fan
from oscillating.
NOTE: The 'SWING' button is
located behind the rear grille, on
the motor head.
10
Continued...
Adjustable Tilting Head
The desk fan incorporates a
manually adjustable tilt head for
directional air coverage.
To adjust the angle of the head,
loosen the tilt control knob located
beneath the motor head, tilt the head
to the required angle, then tighten
the control knob.
Advertisement
