Stopping Timecode Output When Recording Is Stopped .P - Zoom ZF8N Operation Manual

Setting timecode functions
Setting timecode functions
Setting value
The internal timecode will chase the external timecode.
You can also enable the automatic generation of internal
timecode when there is no external timecode. (→ P .129)
Ext Auto Rec
Recording starts automatically when external timecode
input is detected. Recording stops automatically when
external timecode stops.
128
(continued)
(continued)
Explanation
Stopping timecode output when recording is stopped
You can set whether or not timecode is output from the
TIMECODE OUT jack when recording is stopped.
4.
Mode
Use to select
and press .
5.
Int Auto
Use to select
Mute
, and press
6.
On
Use to select
and press .
NOTE
• Timecode will continue to be output when recording/playback is
paused.
• This cannot be set when Mode is set to Off, Int Record Run, Ext
or Ext Auto Rec.
,
.
,