Beko DVS Series User Manual page 15

Installation
After detecting the water hardness:
If the hardness level of the water that you use is above 50°dH or if you are using well water,
than it is recommended to use filter and water purification devices.If the hardness level of
the water that you use is below 7°dH, there is no need to use salt in your dishwasher. In this
case, the Salt Indicator light on the control panel of your dishwasher will light continuously.
If the water hardness is set to level 1, the Salt Indicator will light continuously although it is
not necessary to use salt. If you use salt under this condition, salt will not be consumed and
the lamp will not illuminate.
C
When moving, you will need
to set the water hardness
level of your dishwasher again
according to the information
above, depending on the water
hardness of the place you have
moved to.
If the water hardness level
of your machine is adjusted
previously, your machine
will display the most recent
hardness level adjustment.
Dishwasher / User's Manual
15 / 42 EN