Electrical Parts - Century COMFORT-AIRE VMH-SG Series Service Manual

Service Manual - VMHxxSG
3.2

Electrical parts

Antistatic gloves must be worn when you disassemble the electronic box.
WARNING:
Note: Remove the air outlet grille(refer to 3.1 Panel Plate) before disassembling electrical parts.
i) PCB for ON-OFF Models
12. PCB board 12
Procedure
1) Unfix the hooks and then open the
electronic control box cover (4 hooks)
(see CJ_ODU_PCB_012-1 ).
2) Remove 6 screws on the electronic
control board and then turn over
the electronic control board (see
CJ_ODU_PCB_012-2 ).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
 Outdoor Unit Disassembly 66
Outdoor Unit Disassembly 9
CJ_ODU_PCB_012-1
CJ_ODU_PCB_012-2
