Service Manual - VMHxxSG
2.2
Electrical parts (Antistatic gloves must be worn.)
Note: Open the front panel (refer to 2.1 Front panel) before disassembling electrical parts.
Procedure
1) Pull the two lifts of the cover of
electronic control box with thumbs
and then open it. (see CJ_EP_008)
2) Raise the mandril to fix the cover.(see
CJ_EP_008)
3) Pull the electrical control box holder
to remove it. (see CJ_EP_009).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly 7
Indoor Unit Disassembly 7
CJ_EP_008
CJ_EP_009