Table of Contents
Advertisement
4. The station cannot access the Internet in the infrastructure
configuration.
Make sure the station is associated and joined with the AP. If Wired
Equivalent Privacy (WEP) security is enabled on the AP, the station must
have the proper WEP keys specified. Also make sure TCP/IP properties
are correctly configured.
5. ARCCSEL Country Code Selector shows the following error
message: No configurable D-Link network cards were found in this
system.
Make sure the D-Link WMP-A12 Wireless Network mini PCI Card has
Release 1.1 EEPROM contents programmed. D-Link CardBus Reference
Design boards that were released prior to Release 1.1 do not contain the
regulatory domain information in the EEPROM. Therefore, the country
code selection utility will not recognize the card.
Advertisement
Table of Contents
