Page 1
WETSUITS Manual deep down you want the best scubapro.com...
Page 2
English ...............1 Deutsch ..............8 Français ............16 Italiano .............23 Español ............30 Nederlands ............38 Português ............45 Magyar .............53 Polski ...............60 Romana ............67...
Page 3
SCUBAPRO. This manual describes materials, construction, use, care, maintenance, repair, and inherent risks involved in the use of neoprene wetsuits for SCUBA Diving. Introduction and safety advice Thanks for choosing the high quality of a SCUBAPRO wetsuit, ensuring a new level of comfort and safety for all your diving adventures.
Page 4
And SCUBAPRO innovates even further, our wetsuits are made with an exclusive SCUBAPRO formula: X-Foam neoprene. X-Foam is the only formula which complies to very strict P.A.H. test requirements. P.A.H.
Page 5
Wetsuit fi t • Wetsuits are designed to fi t closely against the body of the diver, nevertheless the wetsuit must not be overly tight, impair movement or breathing or be restrictive in any area.
Page 6
• Fold the neoprene of the ankle gusset (if present) away from the inner seals. • Grasp the suit material at calf level and gently ease the foot through the lower opening. Pull the suit up over the leg. • Repeat with the other leg. •...
Page 7
SCUBA diving activity. These risks include: Hypothermia – Hyperthermia Wetsuits are used in varying temperature conditions, where there may be combinations of cold at the surface and in the water or warm/hot surface conditions and cold water. It is important to be aware of your own thermal comfort range, so as to be able to prevent overheating or chilling.
Page 8
Buoyancy change at depth All neoprene products used in SCUBA diving incorporate a closed-cell foam to provide thermal protection. As the diver descends, the pressure increase causes these bubbles to shrink in volume, resulting in a reduction of buoyancy at depth.
(in a washing machine set on the “delicate fabrics” program) Storage and Transport Wetsuits are best stored on the SCUBAPRO “Multi- Hanger” that can hold all wetsuit components. Keep the wetsuit in a dry, cool place and away from direct sunlight.
Need help?
Do you have a question about the WETSUITS and is the answer not in the manual?
Questions and answers