ZBTlink ZBT-WE1326 Manual page 6

Port(Will adjust with the specific mode)
Port
DC
LAN
WAN
Button(Will adjust with the specific mode)
Button
RESET/WPS
Antenna
n 2.2 Rest
If you want to rest to the factory default settings, please refer the below steps
1) To plug the power adapter.
2) When the router works normally, press the REST/WPS button for 8 seconds.
3) All the router's LEDs will off and then on again, wait until it work normally.
4) When above 3 steps done, the router will rest to the factory default setting.
Pic 2-2 Back Panel
Description
Power Port
LAN Port (RJ45)
WAN Port (RJ45)
Description
RESET/WPS
Multi-function button
4* 5Dbi omni external
antenna
SHENZHEN ZHIBOTONG ELECTRONICS CO.,LTD
Function
Connect the supplied power
adapter.
Connect to the devices in the
LAN, such as HUB, switches or
PC
Connect to the WAN device, data
exchange with the internet
Function
Rest: Press for 8 seconds
WPS: Press one times.
Wireless data
receive
transfer and