Page 1
SLCNX76 Propane Gas Fi re Pi t Tabl e 50,000 BTU Square Gas Firepits with Cover for Outside...
Page 2
DANGER FIRE OR EXPLOSION HAZARD If you smell gas: • Shut off gas to the appliance. • Extinguish any open flame. • If odor continues, leave the area immediately. • After leaving the area, call your gas supplier or fire department. Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.
SAFETY INFORMATION Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so may result in a fire, explosion, injury or death. WARNING • The installation of this unit must adhere to local codes or Propane Storage and Handling Code, CSA B149.2.
Page 4
• Always ensure that lava rocks/pumice stones/LavaGlass are completely dry before use. Failure to do so will cause them to crack or pop. • Do not operate unit until all parts are fully assembled. • Do not paint or color any part of this heating unit. •...
Page 5
• All installation and repair should be done by a qualified professional. This unit should be inspected annually and cleaned regularly. • Inspect all elements of this heating unit before each use. If there is damage, the burner must be replaced. •...
Page 6
IF APPLICABLE: • Allow heating item to cool completely before placing on lid. • DO NOT use heating item while lid is installed. Always remove the lid while heating item is in use. SAFETY INFORMATION Only use the regulator and hose assembly provided with this unit. Replacement parts must be supplied directly by us.
PARTS LIST SPECIFICATION SPECIFICATION ITEM ITEM Body 1 PC Reducing Nipple 1 PC Guard 1 PC Control Knob 1 PC Thermocouple 1 PC Ignitor 1 PC Ignition Pin 1 PC Groundwire 1 PC Corrugated Pipe 1 PC Lava rocks 1 Box Gas valve 1 PC PVC cover...
Page 8
Check that the control knob for the gas supply system is turned to the “OFF” position before starting any assembly. PRESSURE RELIEF VALVE CYLINDER VALVE BLACK COUPLING NUT BLEED-OFF turn clockwise to connect VALVE turn clockwise REGULATOR to reseal Turn the cylinder valve on the tank clockwise to close the propane tank. Attach the preassembled regulator from the Body to the cylinder valve by turning the regulator coupling nut clockwise.
ASSEMBLY INSTRUCTIONS Pour the box of lava rocks into the firebowl. CAUTION To ensure proper function, the guard on this burner should be free of lava rocks at all. OPERATION Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area.
5. Push in the control knob and turn to the “HIGH” position. Keep holding down the control knob to allow gas to fow for 15 seconds. 6. If ignition doesn’t occur within a few seconds release the control knob and rotate to the “OFF”...
TROUBLESHOOTING Problem Cause Solution Igniter pin and burner are wet Dry off with a soft cloth Igniter battery is incorrectly Check which direction the inserted battery is inserted Heating unit won’t Contact us for parts Igniter pin is broken light replacement Reconnect wire to the Electrode wire is loose or...
Page 12
TROUBLESHOOTING Problem Cause Solution No gas flow Check that the gas tank isn’t empty Turn the control knob to Excess flow safety valve has been activated the ‘off’ position. Close the Sudden drop in tank valve and disconnect gas flow propane gas tank.
Page 13
Features: • Not Convertible to Natural Gas • Assembled Gas Hose Regulator • Adjustable Flame Height by Valve Knob • Sturdy Metal Gas Fire Pit Table • Control Panel • 50,000 BTU Stainless Steel Burner • Constructs with Weather Resistant •...
Page 14
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...
Need help?
Do you have a question about the SLCNX76 and is the answer not in the manual?
Questions and answers