Setting Cruise Control; Resuming A Set Speed - Chevrolet 2009 Silverado Owner's Manual

T
(On/Off): Turns the system on or off. The indicator
light is on when cruise control is on and turns off
when cruise control is off.
+ RES (Resume/Accelerate): Press to make the
vehicle accelerate or resume to a previously set speed.
SET – (Set/Coast): Press to set the speed or make
the vehicle decelerate.
[
(Cancel): Press to cancel cruise control without
erasing the set speed from memory.
3-14
The cruise control buttons
are located on left side of
the steering wheel.

Setting Cruise Control

Cruise control will not work if the parking brake is set, or
if the master cylinder brake fluid level is low.
The cruise control light on the instrument panel cluster
will come on after the cruise control has been set to
the desired speed.
CAUTION:
{
If you leave your cruise control on when you are not
using cruise, you might hit a button and go into
cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise control.
T
1. Press .
2. Get up to the desired speed.
3. Press the SET− button located on the steering
wheel and release it.
4. Take your foot off the accelerator.

Resuming a Set Speed

If the brakes are applied while the cruise control is set,
the cruise control is disengaged. But it does not
need to be reset.