Page 1
Z CAM K1 Pro K2501 QUICK USER GUIDE HOW TO TURN ON Z CAM K1 PRO AC/DC Power Adapter - Connect power cable (15. LEMO plug) to power socket (14) of Z CAM K1 camera unit. - Connect D-TAP connector (17. D-TAP end) to power cable (16. D-TAP plug).
Page 2
VIDEO STITCHING - Connect Z CAM K1 Pro to PC through the ethernet port (11). - Download and install Z CAM Controller from www.z-cam.com . - Open Z CAM Controller and select Z CAM K1 Pro. - Use Downloader from Tools to download video files accordingly.
Page 3
properly inserted. All red : When Z CAM K1 Pro is turned on but without SD cards. Flashing green : When Z CAM K1 Pro is recording, LED indicator will flash once every second. Flashing red : When SD card memory is full, LED indicator will flash every 500ms.
Page 4
indirectly, by unauthorized personnel using unauthorized replacement parts and/or services. LED INDICATOR STATUS Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. FCC CAUTION Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Page 5
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐...
Need help?
Do you have a question about the K2501 and is the answer not in the manual?
Questions and answers