Electrolux EW23BC87SS5 Use And Care Manual page 23

Controls - Non-Dispenser Models
press & hold
on default
settings
off
refrigerator temp
freezer temp
temp
mode
hold to reset
good
order
water
filter
replace
hold to reset
good
order
air
filter
replace
door ajar
high temp
power fail
IQ-Touch
TM
IMPORTANT
Pressing the system on/off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
fast freeze Activates a faster rate for freezing food.
fast ice Temporarily increases cooling for freezer to
increase the production of ice
water filter Press and hold for three seconds to reset
after filter change.
air filter
Filter condition status is always displayed
when door is open. Press and hold for
three seconds to reset after filter change.
temp mode Touch to toggle display from Fahrenheit to
Celsius.
mute
Tones emitted by each key press can be
sounds turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
default Resets all refrigerator settings such as
settings temp, temp display and tones to their
factory default settings.
on off Press and hold for three seconds to turn off
the cooling system to clean the refrigerator.
It also turns off the ice maker. The digital
displays will read OFF.
vacation
Conserves energy by increasing the time
mode between automatic defrost. This feature is
automatically activated during long periods
between door openings. Vacation mode is
manually activated when the red indicator is lit.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the
desired setting.
The temperature setting will begin to blink with the first
touch. The display will time out after 10 seconds and return
to the basic display.
NOTE
The recommended settings for a product installed in a
kitchen is 37˚F for the fresh food compartment and 0˚F for
the freezer.
23