GE JVM3162RJSS Installation Instructions Manual page 32

MOUNT THE OVEN
A6.
Cabinet Front
Cabinet Bottom Shelf
Oven Top
Attach the oven to the top cabinet by inserting
2 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
3
to keep power cord tight. Be careful not to
pinch the cord, especially when mounting flush
tobottom of cabinet.
Tighten the two screws to the top of the oven
4
completely. (While tightening screws, hold
the oven in place against the wall and the top
cabinet.)
Install grease filters. See the Owner's Manual
5
packed with the oven.
32
Installation Instructions
(continued)
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
ADJUST THE EXHAUST
A7.
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
A8.
CONNECTING DUCTWORK
Extend the house duct down to connect to
1
the exhaust adaptor.
2 Seal exhaust duct joints using duct tape.
Back of
Oven
Cover Plate
House Duct
31-7000173 Rev. 0