Table of Contents
Advertisement
Identify the Parts
/
1.
Short press: Power On.
Pause or Play.
Move the selection Up.
Press and hold 1 second: Enter.
Press and hold 3 seconds: Power Off.
2.
Move the selection Left, display the Previous photo.
3.
Move the selection Right, display the Next photo.
4.
Short press: Move the selection Down, Exit slideshow.
Press and hold 2 seconds: Show or close the OSD Menu Mode.
OSD Menu Mode will close automatically after 10 seconds of menu inactivity.
5. USB port for USB Flash Drives
6. Card slot for SD, SDHC, MMC, MS
7. DC power input
8. Stand
Setup Up the Digital Photo Frame
The Digital Photo Frame is easy to set up. Just follow these steps:
1. Insert the stand with the notch facing up.
2. Insert a memory card into appropriate slot.
S D, SDHC, MMC, MS.
N ote: The card will only fit in one direction; do not force it. The card should fit snugly
when properly inserted. Please see the memory card diagrams printed on the back of the
photo frame.
5
Advertisement
Table of Contents
