Identify The Parts - ViewSonic VS13471 User Manual

Identify the Parts

Button Action
Move the selection up or left, display the previous photo, or select the previous file
ENTER Select the highlighted option, start a Slide Show , Pause or Play
Move the selection down or right, display the next photo or select the next file.
EXIT Exit the current display, or go back a screen.
Menu Into the OSD Menu Mode
Power(On/Off)
Setup Up the Digital Photo Frame
The Digital Photo Frame is easy to set up. Just follow these steps:
1. Plug the AC Power Adapter into the Digital Photo Frame and into a wall outlet.
2. Insert a memory card into appropriate slot.
Secure Digital™ or MultiMedia Card™, Memeoy Stick™, MemoryStick Pro™, Memory
Stick Pro Duo™, Memory Stick Pro Duo™, xD Picture Card™.
3. Pull out adjustable Stand to adjust view angle.
 N ote: The card will only fit in one direction; do not force it. The card should fit snugly
when properly inserted.
4. Press the Power Button on the back of the Digital Photo frame ON. The Digital Photo
frame will automatically start a slide show of the photo on the card.
5. To display photos individually, press the EXIT button to open the Thumbnails Screen.
Use the Up and Sown arrows to choose a Photo. Press the Play button (
the Digital Photo frame, or the Enter button on the remote control.
 N ote: Pull the plastic tab sticking out of the remote control. It protects the battery, and
the remote control will not work unless it is removed.
6. To restart the Slide Show, press the Play button (
button on the remote control.
ViewSonic
) again, or press the Slide Show
5
) on the top of
VFA724W