Table of Contents
Advertisement
Removing the metal grease filter
:
Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Note: Only use genuine replacement filters. This ensures
optimal performance of the appliance.
Press the locks on the left and right of the filter grille.
1.
Swing the filter grille down.
2.
Position the filter grille at an angle and remove it.
3.
Remove the wires and then the metal filter mat.
4.
After removing the metal grease filter, clean the inside of the
5.
appliance.
Clean the filter grille.
6.
Fitting the metal grease filter
Place the metal filter mat in the filter grille.
1.
Clamp the metal filter mat in place with the wires.
2.
Insert the filter grille.
3.
Note: Make sure that the locks on the left and right of the
filter grille engage.
Changing the activated charcoal filter (only in
circulating-air mode)
In order to guarantee efficient odour filtration, the filter must be
serviced regularly.
The activated charcoal filters must be replaced at least every
4 months.
Notes
The activated charcoal filters are not included in the delivery.
■
The activated charcoal filters can be obtained from specialist
retailers, from our after-sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Note: Only use genuine replacement filters. This ensures
optimal performance of the appliance.
Remove the fleece grease filter; see the section entitled
1.
Removing the metal grease filter.
Undo the threaded joints on the activated charcoal filter
2.
covers.
Remove the activated charcoal filter.
3.
Insert the new activated charcoal filter.
4.
Screw the covers into place.
5.
Install the metal grease filter; see the section entitled
6.
Installing the metal grease filter.
7
Advertisement
Table of Contents
