Summary of Contents for Campania International FT-295
Page 1
FT-295 Falling Water 1 Fountain (6 Pieces) Revised July 11, 2016 Components and Parts List FT-286A 8.25”x21”x15.5” 171lb FT-286B 4”x17.5”x1” FT-286C 6.75”x21”x6.75” 20lb Pump Kit and Parts List Tools Needed Copper spiller Level FT-286D 2 oz Silicone tube 1.25”x7”x4.75” 12” length 5/8” non-kink hose (1)
Page 2
FT-295 & 286 Falling Water 1 & 2 Fountain Revised July 11, 2016 (5 pieces) ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface capable of holding a minimum of 500 pounds with approximately a 5 1/4” square foot footprint.
Page 3
recommended that fountains be placed directly on grass or dirt. Position the channel opening at the base of each fountain toward the electrical outlet to be used since the pump cord will be threaded through this opening. For more Campania product information visit www.campaniainternational.com...
This manual is also suitable for:
Ft-286aFt-286bFt-286cFt-286dFt-286fFt-288e...
Show all