Advertisement
Quick Links
FT-295 Falling Water 1 Fountain
(6 Pieces)
Components and Parts List
FT-286A
8.25"x21"x15.5"
171lb
FT-286B
4"x17.5"x1"
6lb
FT-286C
6.75"x21"x6.75"
20lb
FT-286D
1.25"x7"x4.75"
4lb
FT-286F
22.25"x15"x15"
140lb
FT-288E
28"x16.50"x3"
37lb
Pump Kit and Parts List
Copper spiller
2 oz Silicone tube
12" length 5/8" non-kink hose (1)
Hose clamps(3)
Note: Clamps can be used as flow
restrictors
525 GPH Pump(1)
Wedges(3)
Revised July 11, 2016
Tools Needed
Level
This Fountain Uses
FTNCOV-LRG
FT-286E (For FT-
286)
22.25"x15"x15"
140 lb
Advertisement
Related Manuals for Campania International FT-295
Summary of Contents for Campania International FT-295
- Page 1 FT-295 Falling Water 1 Fountain (6 Pieces) Revised July 11, 2016 Components and Parts List FT-286A 8.25”x21”x15.5” 171lb FT-286B 4”x17.5”x1” FT-286C 6.75”x21”x6.75” 20lb Pump Kit and Parts List Tools Needed Copper spiller Level FT-286D 2 oz Silicone tube 1.25”x7”x4.75” 12” length 5/8” non-kink hose (1)
- Page 2 FT-295 & 286 Falling Water 1 & 2 Fountain Revised July 11, 2016 (5 pieces) ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a level surface capable of holding a minimum of 500 pounds with approximately a 5 1/4” square foot footprint.
- Page 3 recommended that fountains be placed directly on grass or dirt. Position the channel opening at the base of each fountain toward the electrical outlet to be used since the pump cord will be threaded through this opening. For more Campania product information visit www.campaniainternational.com...